Product Categories
We currently have the following Product Ranges available for Slab Accessories
Cebex 100
| Code | Size |
| COM100 | 24 x 225g |
Click image to enlarge
Is an admixture for site batched cementitious grouts where a reduced water/cement ratio and positive expansion is required. Yield:
50kg of opc + 20-22 ltrs water
+ 225g cebex 100 = 36 litres
50Kg op opc + 22-24 ltrs water
+ 225g cebex 100 = 57 litres
Non shrink grout
| Code | Size | Details |
| NSG25 | 25kg | |
| PADDLE | Mixing paddle |
Click image to enlarge
A high strength non shrink cementitious grout when added to water provides excellent free flow properties for grouting in holding down bolts. Coverage: 13 litres/25kg approx.
Holding down bolts
| Code | Size |
| 20HDB300 | M20 x 300mm |
| 20HDB375 | M20 x 375mm |
| 20HDB450 | M20 x 450mm |
| 24HDB375 | M24 x 375mm |
| 24HDB450 | M24 x 450mm |
Click image to enlarge
A range of high tensile grade 8.8 holding down bolts complete with nuts and washer plates 100 x 100 x 10mm
Expanded metal bolt boxes
| Code | Depth | Diameter |
| EXP0 | 150mm | 75mm |
| EXP1 | 225mm | 75mm |
| EXP2 | 300mm | 75mm |
| EXP3 | 375mm | 100mm |
| EXP4 | 450mm | 100mm |
| EXP5 | 600mm | 100mm |
Click image to enlarge
Made from expanded metal for the positioning of holding down bolts where the bolt box is to remain in the concrete.
Polystyrene bolt box
| Code | Depth | Description |
| PC0 | 150mm | |
| PC1 | 225mm | |
| PC2 | 300mm | |
| PC3 | 375mm | |
| PC4 | 450mm | |
| PC5 | 525mm | |
| PC6 | 610mm | |
| DIS05 | Disolver 5ltr | |
| DIS25 | Disolver 25ltr |
Click image to enlarge
An economical way of providing a void around holding down bolts for steel frame buildings.
Waxed cardboard bolt box
| Code | Depth | Taper |
| CB1 | 225mm | 70 x 20 |
| CB2 | 300mm | 92 x 20 |
| CB3 | 375mm | 108 x 25 |
| CB4 | 460mm | 114 x 25 |
| CB5 | 535mm | 118 x 30 |
| CB6 | 610mm | 133 x 30 |
| CB7 | 760mm | 133 x 30 |
Click image to enlarge
Made from waxed cardboard, they provide an easy method of bolt alignment for steel frame buildings.
Denso tape
| Code | Size |
| DEN75 | 75mm x 10m |
Click image to enlarge
Used to protect bolt heads prior to pouring concrete. Roll size: 75mm x 10m
Void formers
| Code | Size | Pack |
| VH20 | 20mm x 10mm | 3m |
| VF20 | 20mm x 20mm | 3m |
| VH25 | 25mm x 12mm | 3m |
| VF25 | 25mm x 25mm | 3m |
Click image to enlarge
A reusable rigid PVC void former used in conjunction with fibre boards to create a grove in wet concrete prior to sealing with joint sealant.
Aluminium T-Bar
| Code | Size | Pack |
| TB50 | 50mm | 5m |
| TB75 | 75mm | 5m |
Click image to enlarge
A rigid reusable aluminium T-section used to form a straight void in wet concrete to accept top crack inducers.
One part top crack inducer
| Code | Size | Pack |
| CI50 | 10mm x 50mm | 5m |
| CI75 | 10mm x 75mm | 5m |
Click image to enlarge
Made from extruded PVC and used to induce controlled cracking in concrete slabs. Can be left in place omitting the use of a joint sealant.
Bottom crack inducer
| Code | Size | Pack |
| CY40 | 40mm | 5m |
| CY75 | 75mm | 5m |
Click image to enlarge
Used to induce a controlled crack from the underside of slabs. Can be used in conjunction with either top crack inducers or saw cutting.
Two part top crack inducer
| Code | Size | Pack |
| CI50/10 | 10mm x 50mm | 5m |
| CI75/10 | 10mm x 75mm | 5m |
Click image to enlarge
Used in the same application as one part crack inducer but where the top section can be removed after concrete has
cured to leave a void for sealant
10mm x 25mm.
Hydrocell XL joint fillerboard
| Code | Thickness |
| HDFS10 | 10mm |
| HDFS15 | 15mm |
| HDFS20 | 20mm |
| HDFS25 | 25mm |
Click image to enlarge
A crossed linked, non absorbent, semi-rigid, cellular polyethylene joint used for forming expansion joints in concrete, brickwork and blockwork. The product provides excellent support to sealants subject to hydrostatic pressure and is particularly recommended for water retaining or water excluding structures. Density: 60 kg/m3. Sheet size: 1.8m x 0.9m. Cut strips available on request.
Adhesives
| Code | Description | Unit |
| CONTACT | Contact glue | 1 ltr |
| CONTACT/5 | Contact glue | 5 ltr |
Click image to enlarge
A contact adhesive designed for the fixing of fillerboards to a wide range of surfaces.
Foam fillerboard (20mm and 25mm)
| Code | Width | 20mm | 25mm |
| 100mm | 20EXP100 | 25EXP100 | |
| 125mm | 20EXP125 | 25EXP125 | |
| 150mm | 20EXP150 | 25EXP150 | |
| 175mm | 20EXP175 | 25EXP175 | |
| 200mm | 20EXP200 | 25EXP200 | |
| 225mm | 20EXP225 | 25EXP225 | |
| 250mm | 20EXP250 | 25EXP250 |
Click image to enlarge
s a closed cell polyethylene joint filler for use as expansion joint filler in brick and blockwork, isolation joints and hinge joints where a readily compressible low load transfer joint filler is required. Density 35kg/m3. Supplied in sheets and cut strips with tear off.
Sheet size: 2.0m x 1.6m
Foam fillerboard
| Code | Width | 10mm | 12mm | 15mm |
| 100mm | 10EXP100 | 12EXP100 | 15EXP100 | |
| 125mm | 10EXP125 | 12EXP125 | 15EXP125 | |
| 150mm | 10EXP150 | 12EXP150 | 15EXP150 | |
| 175mm | 10EXP175 | 12EXP175 | 15EXP175 | |
| 200mm | 10EXP200 | 12EXP200 | 15EXP200 | |
| 225mm | 10EXP225 | 12EXP225 | 15EXP225 | |
| 250mm | 10EXP250 | 12EXP250 | 15EXP250 |
Click image to enlarge
s a closed cell polyethylene joint filler for use as expansion joint filler in brick and blockwork, isolation joints and hinge joints where a readily compressible low load transfer joint filler is required. Density 35kg/m3. Supplied in sheets and cut strips with tear off.
Sheet size: 2.0m x 1.6m
Korkpak fillerboards
| Code | Thickness |
| KORK/10 | 10mm |
| KORK/13 | 13mm |
| KORK/19 | 19mm |
| KORK/25 | 25mm |
Click image to enlarge
Preformed bitumen bonded cork joint fillerboard for critical water retaining, civil and structural expansion joints.
Sheet size 2.0m x 1.0m.
Cut strips available on request.
Wood fibre fillerboard
| Code | Width | 12mm | 20mm | 25mm |
| 100mm | 12FB100 | 20FB100 | 25FB100 | |
| 125mm | 12FB125 | 20FB125 | 25FB125 | |
| 150mm | 12FB150 | 20FB150 | 25FB150 | |
| 175mm | 12FB175 | 20FB175 | 25FB175 | |
| 200mm | 12FB200 | 20FB200 | 25FB200 | |
| 225mm | 12FB225 | 12FB225 | 25FB225 | |
| 250mm | 12FB250 | 20FB250 | 25FB250 |
Click image to enlarge
Is a compressible joint fillerboard manufactured from bitumen impregnated wood fibres. It is supplied in sheet form and is used to form and fill expansion joints in in-situ and pre-cast concrete construction. Complies to DTP specification for Highway Works Dec 1991 Series 1000 Clause 1015 (Pavement Joints).
Sheet size 1.220m x 2.440m
Polythene DPM
| Code | Gauge | Roll Size |
| 500BBAB | 500 | 4m x 50m |
| 1000BBAB | 1000 | 4m x 25m |
| 1200BBAB | 1200 | 4m x 25m |
| 2000BBAB | 2000 | 4m x 12.5m |
Click image to enlarge
A polythene damp proof membrane manufactured to BBA standards 97/3393.
Jointing tapes
| Code | Size | Pack |
| JT75 | 75mm x 33m | 16 |
| D/SIDE30 | 30mm x 30m | 10 |
Click image to enlarge
A 75mm wide tape designed for the sealing of laps on polythene DPM’s. A double sided tape used in the sealing of laps on polythene DPM’s.
Geotextile
| Code | Roll Size |
| GEOTEX | 4.5m x 100m |
Click image to enlarge
A cost effective solution to the problem of constructing stable granular layers over soft foundation soils.
Temporary protective sheeting
| Code | Gauge | Roll Size |
| HDPS | 65 | 4m x 25m |
Click image to enlarge
Ideal as a temporary protective sheet. Colour: opaque.
Terram
| Code | Roll Size |
| TERRAM/1 | 4.5m x 100m |
Click image to enlarge
Terram nonwoven geotextile provides an effective solution to the age old problem of constructing stable granular layers over soft foundation soils.
Application equipment
| Code | Description |
| SKELG | Skeleton gun |
| CART | Blank cartridge |
| P/PUMP | Putzi pump |
| PADDLE | Mixing paddle |
Click image to enlarge
A range of accessories used in the application of resin grouts.
Anchor Bay polyester resin
| Code | Description |
| EASI-CHEM | Easi-chem 380ml |
| RESGUN | Applicator gun |
Click image to enlarge
A thixotropic low-slump polyester resin grout for anchoring bolts, dowel bars, starter bars, into vertical and sloping plane concrete, rock and masonry.
Size: 380ml
Fosroc Lokfix
| Code | Description |
| L/SETS25 | Lokfix S25 |
| L/SETP25 | Lokfix P25 |
Click image to enlarge
The two versions of lokfix are pre-measured, two-part, filled polyester resin grouts. After hardening, the grout produces anchorages of consistent reproducible values.
Lokfix S25 pour grade is for use where the hole is 8 to 40mm greater in diameter than the bar.
Lokfix P25 pump grade is used in overhead or horizontal holes where the hole is up to 25mm greater in diameter than the bar.
Calculation table
| Code |
A guide table to calculate the volume of resin grout required per hole. Figures below are in litres.
| Hole diameter | Bolt diameter | |||||||
12mm | 16mm | 20mm | 25mm | 32mm | 38mm | 44.5mm | 51mm | |
| 20mm | 0.020 | |||||||
| 25mm | 0.038 | 0.029 | ||||||
| 32mm | 0.069 | 0.060 | 0.049 | 0.031 | ||||
| 38mm | 0.093 | 0.082 | 0.064 | |||||
| 45mm | 0.128 | 0.110 | 0.079 | 0.046 | ||||
| 51mm | 0.155 | 0.124 | 0.091 | |||||
| 57mm | 0.206 | 0.175 | 0.142 | 0.100 | ||||
| 64mm | 0.273 | 0.241 | 0.208 | 0.166 | 0.117 | |||
| 76mm | 0.298 | 0.249 | ||||||
Dowel bar sleeves
| Code | Size | Pack |
| 12DBS450 | 12mm x 450mm | 100 |
| 16DBS450 | 16mm x 450mm | 100 |
| 20DBS300 | 20mm x 300mm | 100 |
| 20DBS450 | 20mm x 450mm | 100 |
| 25DBS300 | 25mm x 300mm | 100 |
| 32DBS375 | 32mm x 375mm | 100 |
Click image to enlarge
A flexible pvc sleeve which provides a very efficient method of debonding mild steel dowel bars. Meets with all D.O.T. specifications.
Plastic screed chairs
| Code | Product | Pack |
| SC/SET | Base,collar,saddle | 100 |
| T22 | Shaft | 100m |
Click image to enlarge
An easily adjustable plastic screed chair which is designed to be left in the concrete part or whole. Suitable for use with scaffold tubes or Anchor Bay screeding rail.
For slabs 150mm-350mm.
Dowel bar cradles
| Code | Description |
| Expansion joint cage | |
| Contraction joint cage |
Click image to enlarge
An accurate method used to support dowel bars in contraction and expansion joints in floor slabs and road construction.
Debonding compound
| Code | Pack |
| DB05 | 5ltr |
| DB25 | 25ltr |
Click image to enlarge
A bitumen based compound used for bond breaking of dowel bars in concrete. Complies to Clause 2605 of D.O.E. specification for roads and bridge works.
Dowel bar caps
| Code | Size | Pack |
| 12DC100 | 12mm | 100 |
| 16DC100 | 16mm x 450mm | 100 |
| 20DC100 | 20mm x 300mm | 100 |
| 25DC100 | 25mm | 100 |
| 32DC100 | 32mm | 100 |
Click image to enlarge
A rigid pvc tube with a compressible
filler one end which is designed to allow for expansion of dowel bars in construction joints.
Compression foam plugs
| Code | Size | Pack |
| FP12 | 12mm | 100 |
| FP20 | 20mm | 100 |
| FP16 | 16mm | 100 |
| FP25 | 25mm | 100 |
| FP32 | 32mm | 100 |
Click image to enlarge
A foam plug supplied separately for insertion into dowel bar sleeves to allow for expansion.
Curing agent (standard)
| Code | Size |
| CMG205 | 210ltr |
| CMG25 | 25ltr |
Click image to enlarge
A spray applied acqueous solution of blended silicates designed to prevent early drying out which enables the cement to hydrate more efficiently, considerably reducing the risk of surface crazing and shrinkage whilst also giving a stronger, more durable surface. Coverage: 5.5-6m2/litre
RIW Flexiseal
| Code | Description |
| FLEX/BB5 | Blue base 5ltr |
| FLEX/BB25 | Blue base 25ltr |
| FLEX/BT5 | Black top 5ltr |
| FLEX/BT25 | Black top 25ltr |
| FLEX/PR5 | Primer 5ltr |
| FLEX/PR25 | Primer 25ltr |
A solvent free thixotropic liquid based on urethane pre-polymers which on contact with atmospheric moisture, cures to give a continuous tough rubber like coating. The material is supplied in the form of a blue base coat and a black top coat. Coverage: Base and top 1m2/kg
(2 coats). Primer 8m2/litre (1 coat)
RIW Toughseal
| Code | Size |
| TOUGH/5 | 5ltr |
| TOUGH/20 | 20ltr |
A polymer modified epoxide coating supplied as a two part pack of base and hardener which cures to form a tough black water and waterproof coating. Coverage: 4m2/litre per coat.
RIW L.A.C
| Code | Size |
| RIW205 | 205ltr |
| RIW25 | 25ltr |
A spirit based bitumen emulsion used as a water and water-vapour proof membrane for foundation walls, floor slabs etc. Coverage: 1m2/litre (2 coats). 1.25 m2/litre (steelwork) (2 coats)
Bitumen emulsion
| Code | Size |
| BE205 | 210ltr |
| BE25 | 25ltr |
Click image to enlarge
A cold applied rubberised bitumen emulsion used as a protective damp proof membrane to concrete and brickwork. For best results two coats is recommended. Coverage: 1.1-1.7m2/litre per coat.
Dustproof hardener
| Code | Size |
| DPH205 | 210ltr |
| DPH25 | 25ltr |
Click image to enlarge
A solution used as a treatment on new old concrete to give a superior surface resistance to abrasion and cracking attack with the added bonus of dust reduction. Coverage: 6 m2/litre approx.
Curing agent (90% efficienty)
| Code | Size |
| CM90R/210 | 210ltr |
| CM90R/25 | 25ltr |
Click image to enlarge
A 90% efficiently resin based curing agent which prevents premature drying out of the concrete surface thus reducing the risk of surface cracking.
Curing agent (90% aluminised)
| Code | Size |
| CM90A/210 | 210ltr |
| CM90A/25 | 25ltr |
Click image to enlarge
A resin based curing membrane which contains aluminium flakes which when sprayed on the concrete surface produces a metallic ‘mirror’ surface to reflect away solar heat, this is particularly advantageous on large expanses of concrete such as airport runways and concrete roadways.
Coverage: 5.5 m2/litre
Curing agent (75% efficienty)
| Code | Size |
| CM75/205 | 210ltr |
| CM75/25 | 25ltr |
Click image to enlarge
A spray applied resin curing membrane used to protect freshly placed or formwork cast concrete from excessive water loss during the critical curing period and should be applied as quickly as possible to ensure maximum benefit. Coverage: 5m2/litre