Product Categories
We currently have the following Product Ranges available for Formwork Products
Anchor Strip™ Continuity System
| Code |
Click image to enlarge
The Anchor Strip reinforcement continuity system has been firmly established over many years as the contractors first choice. This results from consistent delivery of an almost infinitely variable product within a very short lead-time.
To further reassure engineers, Anchor Strip is supported by the highest level of technical endorsement in the form of UK CARES Technical Approval.
Click here for the Anchor Strip™ details page
Wooden corner fillets
| Code | Size | Pack |
| CF20W | 20mm | 100m |
| CF25W | 25mm | 100m |
Click image to enlarge
A wooden section which can be nailed to formwork or column shutters to form chamfered corners.
Plastic corner fillets
| Code | Size | Pack |
| CF11 | 11mm | 100m |
| CFN11 | 11mm | 100m |
| CF15 | 15mm | 100m |
| CFN15 | 15mm | 100m |
| CF20 | 20mm | 100m |
| CFN20 | 20mm | 100m |
| CF25 | 25mm | 100m |
| CFN25 | 25mm | 50m |
| CF30 | 30mm | 50m |
| CFN30 | 30mm | 50m |
Click image to enlarge
An extruded rigid pvc section which can be nailed to formwork or column shutters to form chamfered corners. Supplied with or without nailing flange.
Formwork tape
| Code | Pack |
| FTR50 | 30 rolls |
Click image to enlarge
A pvc tape used for the sealing of joints in formwork to prevent grout loss. Roll size 50mm x 33m
Grout check foam
| Code | Size | Pack |
| 6F12 | 6 x 12mm | 25 no. |
| 12F24 | 12 x 24mm | 12 no. |
Click image to enlarge
Designed for use on all types of formwork. Grout check foam is a closed cell polyethylene foam with a high pressure adhesive on one side used for sealing joints in formwork to prevent grout loss. Available in two sizes:
6mm x 12mm x 10m.
12mm x 24mm x 5m.
Formwork magnets
| Code | Pack |
| MAGNET | 2 |
Click image to enlarge
A magnet used for removing wire and nails from shutters prior to concreting.
Plastic kickers
| Code | Description | Pack |
| P/KICKER | Plastic kicker | 100 |
Click image to enlarge
Plastic formwork kickers are used to secure formwork at the base of walls. They are supplied with a masonry nail which can be placed with the aid of a hilti gun.
Steel adjustable kickers
| Code | Size | Pack |
| KICK/150 | 150mm | 100 |
| KICK/175 | 175mm | 100 |
| KICK/200 | 200mm | 100 |
| KICK/225 | 225mm | 100 |
| KICK/250 | 250mm | 100 |
Click image to enlarge
Designed to eliminate the need to pour a kicker.
Formwork plugs
| Code | Size | Pack |
| F/PLUG11 | 11mm | 1000 |
| F/PLUG20 | 20mm | 1000 |
| F/PLUG22 | 22mm | 1000 |
| F/PLUG26 | 26mm | 1000 |
Click image to enlarge
A plastic conical shaped plug used for the filling of redundant tie holes in timber shutters.
Bright round wire nails
| Code | Size | Pack |
| NAIL/50 | 50mm | 20kg |
| NAIL/65 | 65mm | 20kg |
| NAIL/75 | 75mm | 20kg |
| NAIL/100 | 100mm | 20kg |
| NAIL/150 | 150mm | 20kg |
Click image to enlarge
A high quality bright round wire nail. Supplied in 20kg boxes.
Fire retardant handy foam
| Code | Pack |
| FRF750 | 12 |
Click image to enlarge
A fire retardant aerosol packed polyurethane foam which prevents the transmission of smoke, seals around pipework, insulates against noise, heat or cold. Conforms to din 4102 part 1 class b1. CFC free.
Handy foam
| Code | Pack |
| FHP750 | 12 |
Click image to enlarge
An aerosol packed polyurethane foam which expands when released used for filling gaps in formwork and other construction areas.
Silicone sealant
| Code | Pack |
| S/310 | 25 |
| SKELG | 1 |
Click image to enlarge
A clear high modulus silicone sealant in 310mls which can be used for filling movement joints in formwork.
Mould oil
| Code | Size |
| MO205 | 205 |
| MO25 | 25 |
Click image to enlarge
A general purpose mould oil with good release qualities. For use on all types of formwork. Can be brush or sprayed applied.
Chemical release agent
| Code | Size |
| CRA205 | 205 |
| CRA25 | 25 |
Click image to enlarge
A general purpose chemical release agent which provides excellent release and surface finish. Reduces blowholes, staining and surface blemishes.
Sprayers
| Code | Description |
| MS08/S | 8ltr metal sprayer |
| PS08 | 8ltr plastic sprayer |
| KN20 | 20ltr knapsack |
| NOZZ | Nozzle |
| LANCE | Sprayer lance |
| TRIGGER | Sprayer trigger unit |
| GASK/M | Metal gasket set |
| GASK/P | Plastic gasket set |
| SOLV/5 | Cleaning solvent 5ltr |
| SOLV/25 | Cleaning solvent 25ltr |
Click image to enlarge
High performance sprayer units for the application of mould oil and chemical release agent.
Formwax sealer
| Code | Size |
| FW20 | 20kg |
Click image to enlarge
Formwax is specifically developed for the initial sealing of various formwork surfaces. Based on crystalline waxes and with a fugitive dye which will not stain permanently, this thixotropic material when worked into a surface takes on a smooth, thin paste consistency. Its economy of use, speed of application and compatibility with most types of release agent make it the ideal preservation sealer.
Coverage: 10m2/kg approx.
Barrel accessories
| Code | Description |
| TAP | 3/4 barrel tap |
| PUMP | Barrel pump |
Click image to enlarge
Taps and pumps used in conjunction with plastic and metal barrels.
Shutter repair compound
| Code | Size |
| SFO8 | 8kg |
| SFH1 | Each |
Click image to enlarge
A quick setting two part polyester filler used for filling holes and damaged areas on wood, fibreglass or metal formwork. It is easily worked and sanded and is compatible with release agents.
Surface retarder
| Code | Size |
| SRG25 | 25 |
| SRS25 | 25 |
| SRS205 | 205 |
Click image to enlarge
Mould applied (code SRG25) brushed onto formwork, it is designed to give an exposed aggregate surface which gives an excellent key for subsequent concreting. Surface applied (code SRS25) sprayed onto fresh concrete to give an exposed aggregate finish.
Formwork plugs
| Code | Size | Pack |
| F/PLUG11 | 11mm | 1000 |
| F/PLUG20 | 20mm | 1000 |
| F/PLUG22 | 22mm | 1000 |
| F/PLUG26 | 26mm | 1000 |
Click image to enlarge
A plastic conical shaped plug used
for the filling of redundant tie holes
in timber shutters.
Anchor Bay Beam Form
| Code |
Click image to enlarge
Anchor Bay Beam Form is the quickest and most efficient way to construct ground beams and pile caps.
Made from high-grade 8mm polypropylene, it's non-toxic, recycled material and has significant advantages over traditional timber or steel pan solutions.
For further details, visit the Beam Form minisite, click here
Polystyrene sheets
| Code | Description |
| 25POLY | 25mm polystyrene |
| 50POLY | 50mm polystyrene |
| 100 POLY | 100mm polystyrene |
A SDN grade expanded polystyrene board used to as thermal insulation and void former in walls and ground floor slabs. Can be cut accurately with the aid of a fine tooth saw to any shape or size. Sheet size: 2.44m x 1.2m (8 x 4).
Other thickness available on request
Clayboard
| Code | Thickness |
| CLAY/60 | 60mm |
| CLAY/85 | 85mm |
| CLAY/110 | 110mm |
| CLAY/160 | 160mm |
Is a unique, environmentally friendly void former and foundation stabiliser made from a biodegradable honeycomb core set between lightweight polypropylene facings. When dry clayboard is strong enough to support the weight of wet concrete and steel reinforcement.
Sheet size: 2.440m x 1.0m. Full technical information available on request.
Cellcore
| Code |
Consists of a honeycomb of inter-locking sections made from expanded polystyrene. Designed so as ground movement occurs cellcore compresses and buckles to accommodate it, thereby reducing the forces that would otherwise be transmitted to the foundations. It is used extensively in both residential and commercial applications to protect piled beams and rafts, heavy slabs and reinforced ground floor slabs.
Sheet size: 2.44m x 1.22m.
Grades: CC & CP full technical information available on request.
Claymaster
| Code | Thickness |
| CLAY/50 | 50mm |
| CLAY /75 | 75mm |
| CLAY/100 | 100mm |
| CLAY/125 | 125mm |
| CLAY/150 | 150mm |
| CLAY/175 | 175mm |
a low density expanded polystyrene, designed to compress under load and so reduce the lateral forces of ground movement on the foundation.
Sheet size: 2.4m x 1.2m.
Thickness: 50mm-300mm
Formwork tie rod
| Code | Length |
| TB15 | 6.0M |
| TB15/1.5 | 1.5M |
| TB15/1.2 | 1.2M |
| TB15/3 | 3.0M |
| TB20 | 6.0M |
Click image to enlarge
A self cleaning high tensile steel tie rod designed for use with formwork. Available in 15mm and 20mm diameters.
Wing nuts
| Code | Size |
| WN15 | 15mm |
| WN20 | 20mm |
Click image to enlarge
Used in conjunction with waler plates to secure tie rods in formwork.
Waler plates
| Code | Size |
| WP15 | 15mm |
| WP20 | 20mm |
Click image to enlarge
A high quality pressed plate used in conjunction with tie rods and wing nuts to secure formwork.
Dimensions: 100 x 100 x 10mm to suit 15mm tie rod 120 x 120 x 20mm to suit 20mm tie rod.
Tie rod sleeve
| Code | Size | Pack |
| T22 | 22mm | 500 |
| BC26 | 26mm | 500 |
| BC22/50 | 22/50mm | 125 |
| BC26/50 | 26/50mm | 125 |
| BC/TOOL | 1 |
Click image to enlarge
A rigid pvc tube used as a spacer between formwork and also allows tie rod to be removed easily.
Tie sleeve cones
| Code | Size | Pack |
| BC22 | 22mm | 500 |
| BC26 | 26mm | 500 |
| BC22/50 | 22/50mm | 125 |
| BC26/50 | 26/50mm | 125 |
| BC/TOOL | 1 |
Click image to enlarge
A pvc cone used on both ends of tie rod sleeves which can be easily removed after formwork is struck.
Tie rod connectors
| Code | Size |
| JN15 | 15mm |
Click image to enlarge
A jointing nut used to connect two tie rods together with a centre stop to ensure equal spacing inside the connector. Length: 105mm
Water barrier connectors
| Code | Size |
| WB15 | 15mm |
| WB20 | 20mm |
Click image to enlarge
Used in water retaining structures.
Cast into the concrete wall between
two separate tie rods. After pouring tier rods are removed and water barrier remains in-situ.
Wedge anchors
| Code | Description | Pack |
| WEDGE | M16 x 65mm | 25 |
Click image to enlarge
A m16 x 65mm drop in anchor used for anchoring props in concrete.
Weldable anchor
| Code | Size |
| WELD/ANCHOR | 15mm |
Click image to enlarge
An anchor which can be welded to structural steel beams ,sheet piling and other metal structures to accept 15mm tie rod. Anchors must be welded continuously all the way round load tests should be conducted before use.
Cast in anchor
| Code | Size |
| C/ANCHOR | 15mm |
Click image to enlarge
A plastic cast in anchor which is secured to formwork and cast into initial pour to provide an anchor for tie rod in subsequent pours.
Rock anchor
| Code | Size |
| RA15 | 15mm |
Click image to enlarge
Used for securing single sided formwork in concrete or rock walls.
(37Mm drill bit)
Flupps
| Code | Size | Pack |
| FLUPP | 22mm | 500 |
| FLUPP26 | 26mm | 250 |
| FLUPP32 | 32mm | 125 |
Click image to enlarge
Used in conjunction with tie plug cement to give a water tight seal in areas where tie rods have been removed.
Tie plug cement
| Code | Pack |
| TP8 | 8kg |
Click image to enlarge
A cement specially developed for plugging and waterproofing of tie holes in concrete walls.
Monotub accessories
| Code | Details |
| M/STRAP | Multistrap |
| MONO/KICK | Kicker |
Click image to enlarge
Products used to assist with the erection of monotub tubes.
Monotub
| Code | Diameter | Dimension |
| MONO150 | 150mm | |
| MONO200 | 200mm | |
| MONO240 | 240mm | |
| MONO250 | 250mm | |
| MONO300 | 300mm | |
| MONO350 | 350mm | |
| MONO400 | 400mm | |
| MONO450 | 450mm | |
| MONO500 | 500mm | |
| MONO550 | 550mm | |
| MONO600 | 600mm | |
| MONO650 | 650mm | |
| MONO700 | 700mm | |
| MONO800 | 800mm | |
| MONO900 | 900mm | |
| MONO1000 | 1000mm | |
| MONO1200 | 1200mm | |
| MONO/200S | 200mm x 200mm | |
| MONO/250S | 250mm x 250mm | |
| MONO/300S | 300mm x 300mm | |
| MONO/350S | 350mm x 350mm | |
| MONO/400S | 400mm x 400mm |
Click image to enlarge
Is a disposable formwork for rapid construction of circular and square concrete columns.
Advantages:
Fast and economical to use
100% water resistant and can be stored outside without damaging the quality of the tube.
Light and easy to handle.
Quick and easy to erect
Provides the optimum fair face finish concrete column.
Requires no mould oils or release agents.
Stripped literally in seconds.
Very strong
Can be used for horizontal void forming. Manufactured in a large range of sizes.
Delivered at short notice.
(Popular sizes typically 24/48 hours)
Click here to view the Monotub Minisite